Home
Brochure
 
 

Fabricoat Pneumatic / Electrostatic
Flock Spraying Equipment

PDF downloads:
> Fabricoat Pneumatic / Electrostatic

 

 

Fabricoat Pneumatic / Electrostatic

Unit Components

The complete manual unit comprises the following:

  • Fabricoat P/E combined pneumatic and electrostatic control module.
  • Fabricoat Pneumatic/Electrostatic Gun, which includes
    a) Low capacity non-inductive cable.
    b) Trigger control and earth cable.
    c) Material hose.
    d) Extension nozzle and deflectors.
  • Flock venturi pump.
  • Flock Hopper including motorised stirrer with lid and base unit.
  • Tubular support frame.

TOP

 

SPECIFICATIONS

ELECTRICAL DATA  
Input Voltage 230–250v ac 50/60Hz single phase
(110-115v internal switching)
Output Voltage 60 Kv dc – variable
Current 400µA
Fuse Protection 5 amp mains.
1 amp voltage selection
Polarity Negative – positive on request
Trigger Socket 12v ac
Auto Voltage Regulation Auto voltage regulation gives negative characteristics, which adjust to suit the distance between work piece and spray gun electrode.
   
PNEUMATIC DATA  
Input Air Pressure 4 bar (60 psi)
Input Air Condition Oil free to 0.1 ppm and dry to 1.3 g/cubic Nm
Air Consumption – Normal 3 cu m/hr 2 cfm
Main Air Input Connection Male ¼” BSP
   
ADDITONAL DATA  
Flock hopper Capacity 4 Kg
Venturi Mounted at low level
Flock / Air Controls Flock agitation hopper – shroud air – flock delivery
Auto Selection By fascia switching
Hose Lengths 4 metres standard – other lengths on request
Other Accessories Low velocity nozzle
Extension nozzle
Net Weight 27.5 Kg
Spray gun & Hose weight 0.5 Kg
Packed Weight 40 Kg
Packed Size 60cm x 60cm x 122cm
Maximum Unit Height 1143mm
Maximum Unit Width 450mm
Drum Height 610mm
Drum Width 320mm
   
   
TOP  

 
 

 

© 2008 DCA Elecrostatics Division - Campbell Coutts Ltd.www.flocking.biz email: sales@flocking.biz